پیغمبردوست س ه.١٣٨٨. تکنولوژی فرآوردههای غلات: جلد دوم. انتشارات دانشگاه علوم پزشکی تبریز. تبریز، ص300.
A/S Niro Atomizer, Copenhagen, Denmark 1978b. Determination of moisture. In Sorensen, I H, Krag, J, Pisecky, J and Westergaard, V (Eds.), Analytical methods for dry milk products (4th ed., pp. 10-11). Copenhagen: De ForenedeTrykkerier A/S.
Abadio FDB, Domingues, AM Borges SV, and Oliveira VM, 2004. Physical properties of powdered pineapple (Ananascomosus) juice – effect of maltodextrin concentration and atomization speed. Journal of Food Engineering 64: 285-287.
Abdullah EC and Geldart D, 1999. The use of bulk density measurements as flowability indicators. Powder Technology 102: 151-165.
Adhikari B, Howes T, Bhandari BR and Troung V, 2004. Effect of addition of maltodextrin on drying kinetics and stickiness of sugar and acid-rich foods during convective drying: experiments and modelling. Journal of Food Engineering 62:53-68.
Adhikari B, Howes T, Bhandari BR and Truong V, 2003. In situ characterization of stickiness of sugar-rich foods using a linear actuator driven stickiness testing device. Journal of Food Engineering 8:11–22.
Adhikari B, Howes T, Shrestha AK, Bhandari BR, 2007. Development of stickiness of whey protein isolate and lactose droplets during convective drying. Chemical Engineering and Processing 46: 420-428.
Bhandari BR and Hartel RW, 2005. Phase transitions during food powder production and powder stability. In C. Onwulata (Ed.), Encapsulated and powdered foods (pp. 261-292). Boca Raton, FL: Taylor & Francis.
Bhandari BR and Howes T, 1999. Implication of glass transition for the drying and stability of foods. Journal of Food Engineering 40: 71-79.
Bhandari BR, Datta N and Howes T, 1997. Problems associated with spray drying of sugar-rich foods. Drying Technology 15: 671-684.
Bhandari BR, Patel KC and Chen XD, 2008. Spray drying of food materials process and product characteristics. In XD Chen and AS Mujumdar (Eds.), Drying Technology of Food Processing (pp. 113-157). Blackwell Publishing, UK.
Callahan JC, Cleary GW, Elefant M, Kaplan G, Kensler T and Nash RA, 1982. Equilibrium moisture content of pharmaceutical excipients. Drug Development and Industrial Pharmacy 8: 355-369.
Cano-Chauca M, Stringheta PC, Ramos AM and Cal-Vidal J, 2005. Effect of the carriers on the microstructure of mango powder obtained by spray drying and its functional characterization. Innovative Food Science and Emerging Technologies 6:420-428
Chegini GR and Ghobadian B, 2005. Effect of spray-drying conditions on physical properties of orange juice powder. Drying Technology 23:657-668.
Chegini GR and Ghobadian B, 2007. Spray dryer parameters for fruit juice drying. World Journal of Agricultural Sciences 3:230-236.
Chidavaenzi OC, Buckton G and Koosha F, 2001. The effect of co-spray drying with polyethylene glycol 4000 on the crystallinity and physical form of lactose. International Journal of Pharmaceutics 216:43-49.
Favaro-Trindade C. S, Santana A S, Monterrey-Quintero E S, Trindade M A, and Netto F M, 2010. The use of spray drying technology to reduce bitter taste of casein hydrolysate Food Hydrocolloids, 24: 336-340.
Fernandes LP, Candido RC and Oliveira WP, 2011. Spray drying microencapsulation of Lippiasidoides extracts in carbohydrate blends. Food Bioproducts Processing 90:425-432.
Gallo L, Llabot JM, Allemandi D, Bucalá V, and Piña J, 2011. Influence of spray-drying operating conditions on Rhamnus purshiana (Cáscara sagrada) extract powder physical properties. Powder Technology 208: 205-214.
Ganesan V, Rosentrater KA and Muthukumarappan K, 2008. Flowability and handling characteristics of bulk solids and powders – a review with implications for DDGS. Biosystems Engineering 101:425-435.
Goula AM and Adamopoulos KG, 2008. Effect of maltodextrin addition during spray drying of tomato pulp in dehumidified air: 1. Drying kinetics and product recovery. Drying Technology 26:714-725.
Goula AM and Adamopoulos KG, 2010. A new technique for spray drying orange juice concentrate. Innovative Food Science and Emerging Technologies 11:342-351.
Goula AM, Konstantinos G and Adamopoulos G, 2005. Spray drying of tomato pulp in dehumidified air: I. The effect on powder recovery. Journal of Food Engineering 66:25-34.
Jinapong N, Suphantharika M, and Jamnong P, 2008. Production of instant soymilk powders by ultrafiltration, spray drying and fluidized bed agglomeration. Journal of Food Engineering 84:194-205.
Keogh K, Murray C, Kelly J and O’Kennedy B, 2004. Effect of the particle size of spray-dried milk powder on some properties of chocolate. Lait 84:375-384.
Kim EHJ, Chen XD and Pearce D, 2003. On the mechanisms of surface formation and the surface compositions of industrial milk powders. Drying Technology 21:265-278.
Kim EHJ, Chen XD and Pearce D, 2009. Surface composition of industrial spray-dried milk powders. 1. Development of surface composition during manufacture. Journal of Food Engineering 94:163-168.
Kim, SS and Bhowmik SR, 1990. Survival of lactic acid bacteria during spray drying of plain yogurt. Journal of Food Science 55:1008-1010, 1048.
Koc B, Yilmazer MS, Balkır P and Ertekin FK. 2010. Spray drying of yogurt: optimization of process conditions for improving viability and other quality attributes. Drying Technology, 28, 495-507.
Krokida MK and Maroulis ZB, 1997. Effect of drying method on shrinkage and porosity. Drying Technology 15:2441-2458.
Krokida MK, Zogzas NP and Maroulis ZB, 1998. Shrinkage and porosity during drying. Modeling the effect of vacuum. International Journal of Food Science and Technology 32:445-458.
Krokida MK and Maroulis ZB, 2001. Structural properties of dehydrated products during rehydration. International Journal of Food Science and Technology 36:529-538.
Langrish TAG, 2007. New engineered particles from spray dryers: research needs in spray drying. Drying Technology 25:971-983.
Maa YF, Nguyen PAT and Hsu SW, 1998. Spray drying of air–liquid interface sensitive recombinant human growth hormone. Journal of Pharmaceutical Sciences 87: 152-159.
Mahendran t, 2010. physicochemical properties and sensory characteristics of dehydrated guava concentrate: Effect of drying method and maltodextrin concentration. tropical Agricultural research and Extension 13: 48-54.
Masters K, 1997. Spray dryers. In CGJ Baker (Ed.), Industrial drying of foods (pp. 90-114). New York: Blackie Academic & Professional.
Papadakis SE, Gardeli C and Tzia C, 2006. Sprays drying of raisin juice concentrate. Drying Technology. 24:173-180.
Quek SY, Chok NK and Swedlund P, 2007. The physicochemical properties of spray-dried watermelon powders. Chemical Engineering and Processing 46:386-392.
Reh C, Bhat, SN and Berrut S, 2004. Determination of water content in powdered milk. Food Chemistry 86:457-464.
Rodriguez-Hernandez GR, Gonzalez-Garcia R, Grajales-Lagunes A, Ruiz-Cabrera MA, Abud-Archila M, 2005. Spray-drying of cactus pear juice (Opuntia streptacantha): effect on the physicochemical properties of powder and reconstituted product. Drying Technology 23: 955-973.
Roos YH, 1995. Characterization of food polymers using state diagrams. Journal of Food Engineering 24: 339-360.
Roustapour OR, Hosseinalipour M and Ghobadian B, 2006. An experimental investigation of lime juice drying in a pilot plant spray dryer. Drying Technology 24:181-188.
Shrestha AK, Howes T, Adhikari BP, Wood BJ, Bhandari BR, 2007. Effect of protein concentration on the surface composition, water sorption and glass transition temperature of spray-dried skim milk powders. Journal of Food Chemistry 104:1436-1444.
Silva MA, Sobral PJA and Kieckbusch TG, 2006. State diagrams of freeze-dried camu–camu (Myrciariadubia (HBK) McVaugh) pulp with and without maltodextrin addition. Journal of Food Engineering, 77:426-432.
Straatsma J, Van Houwelingen G, Steenbergen AE and De Jong P, 1999. Spray drying of food products: 2. Prediction of insolubility index. Journal of Food Engineering 42:73-77.
Tonon RV, Barbet C and Hubinger MD 2008. Influence of process conditions on the physicochemical properties of acid (EuterpeOleraceae Mart) powder produced by spray drying. Journal of Food Engineering 88:411-418.
Troung V, Bhandari BR, Howes T, 2005. Optimization of co-current spray drying process of sugar-rich foods. Part I—Moisture and glass transition temperature profile during drying. Journal of Food Engineering 71:55-65.
Walton DE 2000. The morphology of spray-dried particles. A qualitative view. Drying Technology 18:1943-1986.
)